Lubrication of the Dana Spicer Camshaft Bracket
cen mm 42.05.000
Important: Perform Parking Brake Operational Check before lubricating the camshaft bracket.
Pump grease into the camshaft bracket until it appears at the slack adjuster end of the bracket. See Fig..
-
Grease Exit
-
Brake Chamber
-
Slack Adjuster
-
Non-Pressure-Relief Grease Fitting
Fig. 1, Camshaft Bracket Lubrication
Use an NLGI Grade 1 or Grade 2 multipurpose chassis grease. If grease leaks out under the camhead, the camshaft bracket grease seal is worn or damaged. See of the Century Class Trucks Workshop Manual for grease seal replacement instructions.
Note: