Door Latches
cen mm 72.01.000
Note: Light penetrating oils, such as WD40, should not be used because they wash out beneficial factory-installed grease, and they evaporate.
Wipe old grease and dirt from all door latch assemblies, then apply liberal amounts of an approved grease to each moving joint; see Table.. Use an appropriate applicator that will not leave material behind.
Table 1, Approved Grease
Approved Grease |
||
---|---|---|
Application |
Lubricant |
NLGI Grade |
Door Latches |
ConocoPhillips Triton® 460 |
1.5 |
Door Checks |
ConocoPhillips Megaplex® XD3 |
2 |
Table 1, Approved Grease
Note: