Coolant Temperature Gauge
Notice: A sudden increase in coolant temperature may indicate engine or cooling system failure. Bring the vehicle to a safe stop and investigate the cause to prevent further damage. Do not operate the engine until the cause has been determined and corrected.
During normal engine operation, the coolant temperature gauge should read 200 to 205°F (93 to 96°C). See figure . If the temperature remains below 160°F (71°C) or exceeds 235°F (113°C), inspect the cooling system to determine the cause. See the vehicle workshop manual for troubleshooting and repair procedures.
The coolant temperature gauge is very important. See figure . If the coolant temperature rises above 253°F (123°C), the check engine and stop engine lights will illuminate, and the buzzer will sound. At this point, the engine will derate and idle speed will increase, to speed up the cooling fan and water pump to cool the engine.
-
Fuel Level Gauge
-
Dash Message Center
-
Speedometer
-
Engine Oil Pressure Gauge
-
Coolant Temperature Gauge
-
Dash Driver Display Screen
-
Toggle Button, Down
-
Toggle Button, Right
Fig. 1, Gauge Layout (typical, U.S.)
-
Maintenance Warning
-
Left-Turn Indicator
-
High Exhaust System Temperature (HEST) Lamp (not used)
-
Check Engine Warning
-
Stop Engine Warning
-
Malfunction Indicator Lamp (MIL)
-
Engine Brake Indicator (not used)
-
Low Air Pressure Warning
-
Wait to Start Indicator
-
ABS Warning
-
Shift Inhibit Indicator
-
Transmission Overheat Warning
-
Transmission Warning
-
Diesel Particulate Filter (DPF) Lamp (not used)
-
Right-Turn Indicator
-
Fasten Seat Belts Warning
-
Hydraulic Brake System Warning
-
Headlight High-Beam Indicator
-
Traction Control Indicator (not used)
-
Parking Brake On Warning
-
Cruise Control Indicator
-
Auxiliary Power Generator (not used)