Inspection of the Front Box

ep3 DM 20.00.050

    Warning: Washer fluids may be flammable and poisonous. Do not expose washer fluid to an open flame or any burning material, such as a cigarette. Always comply with the washer fluid manufacturer's recommended safety precautions.

  1. Open the hood.
  2. Check the windshield washer reservoir fluid level. The reservoir is located near the right-hand frame rail. See Fig. .

    1. Washer Fluid Filler Cap

    2. Battery Cable Access (BCA) Box

    Fig. 1, Windshield Washer Reservoir

  3. Inspect water evacuation components.
    1. Inspect the rain tray installed at the base of the windshield. Ensure that the seal on the forward edge of the rain tray is in good condition.
    2. Inspect the drain hoses installed on the rain tray. Both hoses should be securely attached to the rain tray and direct water down the aft side of the front fenders.
  4. Inspect the air vent hoses and verify the red caps are in place.
  5. Inspect the steering components.
    1. Inspect tie rods, steering arms, and the drag link for signs of looseness (i.e., shiny spots or rust tracks).
    2. Check the steering gear mounting bolts for signs of looseness.
    3. Inspect the steering intermediate shaft and end yokes for excessive looseness or other damage.
  6. Close the hood.
Note:
Parent topic: Weekly Post-Trip Inspections and Maintenance
Document Number: 0000086788
Manual Publication Date: 2024-03-21
Topic Publication Date: 2025-02-13