Opening the Doors
The physical key can be used to lock and unlock the doors and activate the electrical system.
Important: Record the key number so, if needed, a duplicate key can be made.
Note: The cab door locks can be operated when the doors are open.
To unlock the driver's door from outside the cab, insert the key in the lock and turn it one-quarter turn clockwise. To remove the key, turn it counterclockwise to the original position. Pull the door pull handle as shown, see Fig. to open the door.
-
Lock
-
Door Pull Handle
Fig. 1, Exterior Door Handle
To unlock the passenger's door from outside the cab, insert the key in the lock and turn it one-quarter turn counterclockwise. Turn the key clockwise to the original position to remove it.
To lock a door from outside the cab, close the door if it is open, insert the key in the lock, and turn it in the direction opposite to the unlocking direction (counterclockwise for the driver's door, clockwise for the passenger's door).
To lock either door from inside the cab, push the lock button downwards. See Fig..
-
Lock Button
-
Integral Grab Handle
-
Opening Lever
-
Control Panel
-
Door Light
Fig. 2, Door Interior
To open the door from the inside, lift up on the door lever. This will unlatch the door whether or not it is locked.
To unlock the door without unlatching it, pull the lock button upwards.