Connecting a Phone Using Bluetooth®

ep3 d 03.08.003

    Note: Older phones may require that an authorization code be manually entered on the mobile phone and into the infotainment system.

  1. Open the Device Manager.
  2. Select Connect Device.
  3. Select Connect New Device. The vehicle searches for the device.
  4. If the connection fails, the message My Device Was Not Found will appear. Verify the Activating Bluetooth requirements have been met.
  5. Select the My Device Was Not Found message or press the reload icon at the top right to have the vehicle rescan for devices.
  6. When a device is found, the name of that device will appear on the screen in addition to the message My Device Was Not Found. Select the device name.

    7. Note: The phone will automatically reconnect to the system when in range until deauthorized either in the ICC5 infotainment system or on the phone itself.

  7. A pop-up will appear asking for verification of a passkey on the phone. Verify the passkey. The device is authorized and connected.
Note:
Parent topic: Connecting and Disconnecting a Phone Using Bluetooth®
Document Number: 0000086946
Manual Publication Date: 2024-03-21
Topic Publication Date: 2025-02-13