Windshield Washer System

The windshield washer switch is located at the end of the left-hand stalk switch. Momentarily press the washer switch to initiate a single swipe of the windshield wipers without activating the washer pump.

To activate the windshield washer system, press and hold the washer switch. After a short delay, the pump sprays windshield washer fluid onto the windshield and the wipers turn on at low speed. Continue pressing the switch to pump washer fluid and activate the wipers. After the switch is released, the pump turns off but the wipers operate for one to several wipe cycles, depending on how long the switch was pressed.