Emergency Shutdown Procedures

ep3 dm 10.04.002

The high voltage system can be shut off in the following ways.

  1. Turn the key to OFF and remove the key.
  2. Press the eStop button located on the dash, as shown in Fig. .

    1. Hazard Warning Lights Switch

    2. eStop Button

    Fig. 1,  eStop Button on Dash

    A lock can be inserted through the eStop button guard to keep the button depressed.
  3. In addition, for the use of emergency responders, a cut through cable access point, shown in Fig. exists below each cab door. If the eStop button on the dash cannot be accessed, emergency responders can cut the wiring at either of these locations.

    1. Cable Access Cut Through Point

    Fig. 2, Cable Access Below Cab Door

Note:
Parent topic: Vehicle Shutdown
Document Number: 0000087417
Manual Publication Date: 2024-03-21
Topic Publication Date: 2025-02-13