Sears Sentry High Back Seat

ep3 dm 7.08

For seat adjustment controls, see Fig..

  1. Seat Tilt and Extension Knob

  2. Recliner Handle

  3. Armrest Adjustment Knob

  4. Seat Controls

  5. Forward-Rear Slide and Isolator Lever

Fig. 1, Sears Sentry High Back Seat

  1. Seat Tilt and Extension Knob: Rotate the knob clockwise to change the tilt or extension of the seat. Release the handle to lock the seat into position.
  2. Recliner Handle: Pull upward on the recliner handle to move the backrest forward or back. Release the handle to lock in the backrest angle.
  3. Armrest Adjustment Knob: Rotate the control knob, located on the underside of the armrest, clockwise or counterclockwise to set the angle of the armrest.
  4. Seat Controls:
    Rear rocker switch: Push forward to inflate the lower lumbar bag; push rearward to deflate the bag.
    Forward rocker switch: Push forward to inflate the upper lumbar bag; push rearward to deflate the bag.
  5. Forward-Rear Slide & Isolator Lever:
    Forward-Rear Slide: Facing the seat, move the slide lever all the way to the right to move the seat forward or back. When the seat is in the correct position, release the slide lever to lock it into position. The seat can move 9 inches (22.9 cm).
    Isolator Lever: Facing the seat, move the lever to the left to unlock the seat and allow movement. To lock-out movement, move the handle to the right. The seat may have to be moved slightly forward or back to get the detent into the locked position.
Note:
Parent topic: Seats and Restraints
Document Number: 0000087445
Manual Publication Date: 2024-03-21
Topic Publication Date: 2025-02-13