Wiper Controls
The wipers are operated by a rotary switch on the left-hand stalk switch. There are five settings: off, two intermittent speeds, and two continuous speeds. Symbols mark each setting on the dial.
Turn the wipers on by rotating the wiper speed switch up. Continue to rotate the switch to increase the wiper speed through the two intermittent speeds, the continuous low speed, to the continuous high speed. Rotate the switch down to slow the wipers. Rotate the switch all the way down to turn the wipers off.
The default speeds for the two intermittent speeds are six seconds and one second.
The first intermittent speed of six seconds is programmable. It can be reduced to one second or increased up to 25 seconds. To program the interval, rotate the switch from the first intermittent position to the off position, wait for the desired interval between wipes to lapse (between one and 25 seconds), and then move the switch back to the first intermittent position. If the switch is kept in the off position for more than 50 seconds, the interval changes back to the default of 6 seconds.
The second intermittent speed has an interval of one second is not programmable.
Note: This vehicle is equipped with a feature that turns on the headlights if the windshield wipers are on and the vehicle is moving faster than 10 mph (16 km/h). At speeds between 10 and 40 mph (16 to 64 km/h), cycling the headlight switch, shown, see Fig., turns the headlights off.
-
Fog Lights (optional)—Activate by pulling the switch out when the marker lights or headlights are on.
-
Automatic Headlights
-
Off
-
Marker Lights
-
Headlights