ICUC Time and Alarm Settings

Time and date are set automatically when the vehicle is equipped with a tachograph. When a vehicle is equipped with a tachograph only the time zone can be changed.

The correct time and date is required for the following ICU functions to work:

• alarm clock,

• predictive maintenance intervals,

• prognostics.

Time Settings: Display Format

In the ICUC, time can be displayed in 12 or 24 hour format. Time format is set under Time Settings under User Settings.

1. Select the gear icon to open the User Settings menu. The last settings menu accessed will open.

2. If not on the Settings Options List Screen, use the Up arrow in the left-hand steering wheel switch pod to move to this screen.

3. Press OK to access the settings menus.

4. Use the Down arrow in the left-hand steering wheel switch pod to get to Time.

5. Press OK to access Time.

6. Use the Right arrow to navigate from 12h to 24h or 24h to 12h.

7. Press OK on the left-hand steering wheel switch pod to choose an option.

Setting An Alarm

Fig. 1, ICUC Alarm Clock Screens

In the ICUC, one alarm can be set under Alarms under the User Settings. See Fig..

The alarm triggers a repeated chirping sound as well as a alarm pop-up. Both can be dismissed by pressing the back button on the left hand steering wheel switch pod.

1. Select the gear icon to open the User Settings menu. The last settings menu accessed will open.

2. If not on the Alarms screen, use the Down arrow in the left-hand steering wheel switch pod to move to this screen.

3. Press OK to access the alarm clock options.

4. Use the Up and Down arrow to choose hour, minute, and am/pm and alarm status.

5. Press OK to set the alarm.