Canada Certification Label

ep4 d 01.04.000

Complete tractors with fifth wheels manufactured for Canada are marked with a Canada certification label as shown, see Fig., attached to the left-hand B-pillar.

Fig. 1, Canadian Certification Label

Complete tractors with fifth wheels manufactured for dual Canada/United States operations will have both a FMVSS certification label and Canada certification label. In this case the FMVSS certification label will be applied on the interior edge of the B-pillar and the Canada certification label will be applied on the exterior edge as shown, see Fig..

Trucks built without a cargo body and tractors built without a fifth wheel that are intended for service in Canada will have an incomplete Canada vehicle certification label attached to the left-hand B-pillar. After completion of the vehicle, a complete Canada certification label must be attached by the final-stage manufacturer to certify that the vehicle conforms to all applicable vehicle safety regulations in effect on the date of completion.

  • Left-Hand B-Pillar

  • Left-Hand Door

  • Right-Hand B-Pillar

  1. Noise Emission Control Label

  2. Customer Assistance Label

  3. FMVSS Certification Label

  4. Canada Certification Label

  5. Entry/Exit Warning Decal

  6. Vehicle Emission Control Information Label

  7. Component GWR Label

Fig. 2,  Label Locations

Note:
Parent topic: Vehicle Identification
Document Number: 0000086630
Manual Publication Date: 2024-03-21
Topic Publication Date: 2025-02-13