Using Standard Adaptive Cruise Control
- To cruise at a particular speed:
- Depress the accelerator pedal until the speedometer reaches the desired speed.
- Press the cruise decelerate/SET button to set the desired speed.
- To disengage the cruise control, do one of the following:
-
Press the CNCL button in the center of the right-hand steering-wheel-mounted switch pod. A single press disengages the cruise control, but retains the set speed.
On vehicle's equipped with a Detroit Diesel engine, press and hold the CNCL button to clear the set speed.
-
In the ICC5 system, press the CNCL button at the bottom of the left-hand control pod. A single press disengages the cruise control, but retains the set speed.
On vehicle's equipped with a Detroit Diesel engine, press and hold the CNCL button to clear the set speed.
-
Depress the brake pedal.
-
If equipped with a manual transmission, press the clutch pedal.
-
- To resume a preselected cruise speed, press the cruise accelerate/RES button. Cruise will return to the last set speed.
- To increase cruise speed, press the cruise accelerate/RES button until the desired set speed is displayed.
- To decrease cruise speed, press the cruise decelerate/SET
button until the desired set speed is displayed.The cruise speed hysteresis (maximum speed above and below the set speed) can be set in the ICU settings menu. The leading vehicle following distance can be set using the quick access button.
Note: The set speed memory is lost whenever the ignition is turned off.
Note: If vehicle speed drops below the minimum cruise control speed, cruise control will disengage. To resume to the preselected cruise speed, increase vehicle speed to above minimum cruise control speed and press the cruise accelerate/RES button.