Hazard Warning Lamps

m2+ d 04.04.009

The hazard warning lamp switch is located on the dash switch panel. See Fig.. The hazard lamps can be activated regardless of the ignition switch position.

To activate the hazard lamps, press the center of the switch once. The switch will blink at the same rate that the hazard lamps flash. Press the switch again to turn them off. All the turn signals on the vehicle and trailer, as well as the turn signal indicators in the ICU, flash simultaneously when the hazard lamps are activated.

  1. Parking Brake Control

  2. Trailer Air Supply Control

  3. Hazard Warning Switch

  4. Trailer Brake Control

Fig. 1, Right-Hand Panel Dash Controls

Note:
Parent topic: Exterior Lighting Controls
Document Number: 0000116839
Manual Publication Date: 2024-10-09
Topic Publication Date: 2024-05-06