Setting and Releasing the Parking Brakes on a Non-Towing Vehicle
m2+ d 11.06.006
Releasing the Parking Brakes on a Non-Towing Vehicle
- Turn on the ignition.
- Verify that the two LED displays illuminate, indicating that the spring brakes are set.
- Close the driver and passenger doors.
- Fasten the seat belt.
- Apply the foot brake.
- Start the engine and allow the system to build pressure to the governor cut-out.
- Push the bottom of the yellow parking brake control.
- Verify that the LED displays on the yellow parking brake control extinguish, then drive the vehicle.
Note: