Exiting Creep Mode

m2+ d 14.03.005

To exit Creep Mode, apply the throttle pedal to accelerate temporarily, or select a higher gear in Manual Mode. (Creep Mode can be resumed in the selected gear by releasing the throttle pedal.)

Note:  The transmission will exit Creep Mode if the engine lugs 150 rpm below the governed low engine idle speed. In this case, a lower gear should be selected if available.

Note:
Parent topic: Eaton™ Automated Transmissions
Document Number: 0000113596
Manual Publication Date: 2024-10-09
Topic Publication Date: 2024-05-06